# |
Part Name (Click to view) |
BOM
Qty |
2 | MAST, CONSOLE XG200 | 1 |
3 | SLIDING PEDAL ARM ASSEMBLY (R) - FULL ASSEMBLY | 1 |
4 | SLIDING PEDAL ARM ASSEMBLY (L) - FULL ASSEMBLY | 1 |
5 | CONNECTING PEDAL ARM (R) - FULL ASSEMBLY XG200 | 1 |
6 | CONNECTING PEDAL ARM (L) - FULL ASSEMBLY XG200 | 1 |
7 | AXLE, FLYWHEEL | 1 |
8 | SWING ARM ASSEMBLY (R) - FULL ASSEMBLY XG200/XG400 | 1 |
9 | SWING ARM ASSEMBLY (L) - FULL ASSEMBLY XG200/XG400 | 1 |
10 | CRANK ARM ASSEMBLY XG200 | 2 |
11 | Flywheel Assembly | 1 |
11-1 | DISK, ROUND (NYLON) XG200 | 2 |
11-2 | STICKER, FLYWHEEL XG200 | 1 |
12 | Pulley, Main | 1 |
13 | PULLEY, DRIVE XG200 | 1 |
14 | Axle, Drive | 1 |
15 | PULLEY, FLYWHEEL XG200 | 1 |
16 | AXLE, IDLER WHEEL (L) XG200/XG400 | 1 |
17 | AXLE, IDLER WHEEL (R) XG200 | 1 |
18 | Bearing Housing | 2 |
19 | BRACKET, SIDE CASE XG200 | 2 |
20 | Axle Stopper | 1 |
21 | BRAKE MAGNET MOUNTING ARM XG200 | 1 |
22 | BRACE, STEEL ROPE XG200 | 2 |
23 | BRACKET, BRAKE MOUNTING E-GLIDE/E-RYDE/XG200 | 1 |
24 | WASHER, CUP FOR M8 BOLT E-GLIDE/E-RYDE/XG200 | 6 |
25 | Bearing, Sealed | 6 |
26 | Bearing, Sealed | 20 |
27 | Sleeve, Rod End | 2 |
28 | NLA Rail, Deck | 4 |
29 | Retainer | 6 |
30 | C-Clip | 5 |
31 | Washer, Wave | 12 |
32 | M6 NYLON NUT | 1 |
33 | Nut | 2 |
34 | Nut, Nylon | 2 |
35 | SCREW, PHILLIPS HEAD M5 X 10MM XG200 | 4 |
36 | M5 × 0.8 - 20m/m_Socket Head Cap Bolt | 1 |
37 | BOLT, SOCKET HEAD CAP M6 X 15MM XG200/XG400 | 8 |
38 | BOLT, SOCKET HEAD CAP M6 X 1.0 (50MM) | 1 |
39 | M8 × 1.25 - 12m/m_Socket Head Cap Bolt | 6 |
40 | M8 × 1.25 - 15m/m_Socket Head Cap Bolt | 7 |
41 | SCREW, SOCKET HEAD CAP M8 X 25MM | 2 |
42 | Bolt | 4 |
43 | M10 × 1.5-80 m/m_Socket Head Cap Bolt | 1 |
44 | ?35 x ?5/16" x 1.5T_ FLAT WASHER | 2 |
45 | Screw, phillips head | 28 |
46 | Screw | 8 |
47 | Washer, split | 4 |
48 | WASHER, SPLIT M6 | 8 |
49 | WASHER, SPLIT M8 (5/16 X 1.5T) E-GLIDE/E-RYDE/XG200 | 1 |
50 | 5/16"×1.5T_Split Washer | 4 |
51 | NUT, M5 X 4T E-GLIDE/E-RYDE/XG200 | 1 |
52 | SCREW, SET M5 X 5MM E-GLIDE/E-RYDE/XG200 | 2 |
53 | BOLT, IDLER ADJUSTMENT M10 X 1.5 X 220L E-GLIDE/E-RYDE/XG200 | 1 |
54 | KEY, WOODRUFF 7 X 7 X 23L E-GLIDE/E-RYDE/XG200 | 2 |
55 | BOLT, SHOULDER M10 X 1.5 X 12 - 36MM XG200 | 2 |
56 | Nut | 2 |
57 | KEY, WOODRUFF 6 X 6 X 16L XG200 | 1 |
58 | WASHER, FLAT 3/16 X 10 X 1 AF83/AF85/XG200 | 4 |
59 | WASHER, FLAT 8 X 35 X 3.0T MB880/XG200/SB700 | 1 |
60 | M4×12mm_Phillips Head Screw (Plated) | 6 |
61 | DISK, ROUND XG200/XG400 | 2 |
62 | COVER, CHAIN (L) XG200/XG400 | 1 |
63 | COVER, CHAIN (R) XG200/XG400 | 1 |
64 | END CAP, SQUARE E-GLIDE/E RYDE/XG200 | 1 |
65 | END CAP, CRANK ARM XG200/XG400 | 2 |
66 | HOLDER, DRINK BOTTLE XG200 | 1 |
67 | SNAP-CAP, M8 (GREY) XG200/XG400 | 6 |
68 | Slide Wheel Cover NEW Material - PP | 2 |
69 | PLUG | 4 |
70 | Round Head End Cap | 2 |
71 | END CAP, HANDGRIP XG200 | 6 |
72 | Pedal, Left | 1 |
73 | PEDAL (R) W/TOE - NO LOGO OR FOAM FS320E/XG200/XG400/XE195(2011) | 1 |
74 | Wheel, Roller | 4 |
75 | HANDPULSE ASSEMBLY W/PLATES XG200 | 2 |
76 | HANDPULSE ASSEMBLY W/PLATES XG200 | 2 |
77 | WHEEL, TRANSPORTATION (~65) E-GLIDE/E-RYDE/XG200 | 2 |
78 | CONSOLE ASSEMBLY XG200 | 1 |
78-1 | COVER, TOP CONSOLE XG200 | 1 |
78-2 | COVER, BOTTOM CONSOLE XG200 | 1 |
78-3 | Cover, Battery | 1 |
78-4 | DISPLAY, UPPER XG200 | 1 |
78-5 | BRACKET, BATTERY XG200 | 1 |
78-6 | BATTERY, C-CELL XG200 | 4 |
79 | MAGNET, SPEED (MUST USE ADHESIVE) E-GLIDE/E-RYDE/XG200/XG400 | 1 |
80 | Sensor Rack | 1 |
81 | SPRING, BRAKE RETURN E-GLIDE/E-RYDE/XG200 | 1 |
82 | FOAM, HANDGRIP (38 X 3T X 360MM) | 2 |
83 | NLA Foot, Leveling - Cushion Foot Pad | 6 |
87 | MAGNET, EARTH (BRAKING) XG200 | 1 |
88 | BELT, DRIVE 6PK (1000MM) XG200 | 1 |
89 | Belt, Drive | 1 |
90 | LEVER, EMERGENCY BRAKE XG200/XG400 | 1 |
91 | EMERGENCY BRAKE ASSEMBLY XG200 | 1 |
92 | CABLE, EMERGENCY BRAKE XG200/XG400 | 1 |
93 | CABLE, RESISTANCE SENSOR (260MM) XG200 | 1 |
94 | MOTOR, GEAR XG200 | 1 |
96 | POWER INPUT JACK XG200/XG400 | 1 |
97 | SENSOR, SPEED W/850MM CABLE XG200 | 1 |
98 | AC Adaptor | 1 |
99 | WIRE, HANDPULSE COILED 500MM XG200 | 1 |
100 | CABLE, COMPUTER (UPPER) 1500MM XG200 | 1 |
101 | CABLE, COMPUTER (LOWER) 1000MM XG200 | 1 |
102 | SCREW, FLAT HEAD PHILLIPS M5 X 12 XG200 | 4 |
103 | SCREW, SELF TAPPING M4 X 12 (BLACK) XG200 | 6 |
107 | Phillips Head Screw Driver | 1 |
108 | Wrench, Allen | 1 |
109 | WRENCH 17MM E-GLIDE/E-RYDE/CE800 | 1 |
110 | Wrench, Allen | 1 |
111 | WRENCH, 13MM | 1 |
112 | M5 x 12m/m_ Button Head Socket Screw | 3 |
114 | PULLEY, TENSION CABLE E-GLIDE/E-RYDE/XG200/XG400 | 1 |
115 | E-CLIP, E5 XG200 | 1 |
116 | Wrench, allen | 1 |
117 | Bearing, Sealed | 4 |
118 | WASHER, FLAT 6 X 16 X 1.0T XG200 | 8 |
| HARDWARE KIT XG200 | 1 |
| LENS, FACE PLATE XG200 | 1 |
| STICKER, LOGO "SPIRIT FITNESS" XG200/XG400 | 2 |
| LABEL, WARNING XG200/XG400 | 1 |
| STICKER, SIDE "E-GLIDE" (ON PEDAL ARM) XG200/XG400 | 2 |
| STICKER, POLY OVAL - SMALL ICON (NEW SPIRIT "S" LOGO) XG200/XG400 | 2 |