# |
Part Name (Click to view) |
BOM
Qty |
1 | Main Frame | 1 |
2 | CONSOLE MAST | 1 |
3 | Mast Handle bar Assembly | 1 |
3.1 | MAST HANDLE BAR ASSEMBLY | 1 |
4 | Seat Carriage | 1 |
4.1 | SEAT CARRIAGE | 1 |
5 | Bracket, Seat, Back | 1 |
6 | Handle Bar | 1 |
6.1 | HANDLE BAR | 1 |
7 | BAR, REAR STABILIZER XU875/XR425/XR895/XBR95/XBU75/XBR55/XBR25/CU800 | 1 |
8 | NLA Crank Axle | 1 |
9L | Plate,Adjustment,Seat Wheel | 2 |
9R | Plate, Adjustment, Seat Wheel | 2 |
10 | Idler Wheel Assembly XBR55(551110)/XBR95(951110) | 1 |
11 | Seat Stop Axle | 2 |
12 | Seat Position Latch-(85×18×23.4×4T) | 1 |
13 | Backing Plate-(80×50×5T) | 3 |
14 | Aluminum Track-(585m/m) | 1 |
15 | Rack-(392×20×6T) | 1 |
16 | Spacer for Stopper Axle-(O13×O19×26.5L) | 4 |
17 | Foot | 2 |
18 | Wheel, Transport | 2 |
19 | Console Assembly | 1 |
19-1 | Console Top Cover | 1 |
19-10 | 300m/m_HR monitor module W/Cable | 1 |
19-11 | 250m/m_Ground Wire | 1 |
19-12 | C-Safe/Cardio Interface Board (21-11-0200-1, RJ-45x2) | 1 |
19-2 | Console Bottom Cover | 1 |
19-3 | Anchor, Fan Grill | 2 |
19-4 | Fan | 1 |
19-5 | Lower Board (ALT-1236-2) CU800/CE800/CR800 | 1 |
19-6 | Console Display Board (21-11-00100 V1.0) | 1 |
19-7 | BOARD, LOWER (ALT#1236-1) CU800/CE800/CR800 | 1 |
19-9 | HR monitor module | 1 |
20 | Pulley, Drive | 1 |
21 | Grip, HR | 1 |
22 | Rubber Foot Pad | 2 |
23 | End Cap, Handlebar, Seat | 2 |
24 | Plug | 2 |
25 | Wheel, Seat | 8 |
26 | Handpulse Input Jack | 1 |
27 | Handpulse | 1 |
28 | Cover | 2 |
29 | FRONT SHROUD(L) | 1 |
30 | FRONT SHROUD(R) | 1 |
31 | CONSOLE MAST COVER | 1 |
32 | Cover, Stabilizer, Front | 1 |
33 | COVER, STEP CR800 | 1 |
34 | ROUND DISK | 2 |
35 | REAR SHROUD(L) | 1 |
36 | REAR SHROUD(R) | 1 |
37 | Rear Stabilizer Cover (# 002142) | 1 |
38 | DRINK BOTTLE HOLDER(R) | 1 |
39 | DRINK BOTTLE HOLDER(L) | 1 |
42 | 300m/m_Handpulse Wire, Coiled | 1 |
43 | Controller, Brake, Generator | 1 |
44 | CABLE, COMPUTER 9PIN CR800 | 1 |
45 | 2100m/m_Hand Pulse Sensor Assembly W/Cable | 1 |
46 | Hall Sensor | 1 |
47 | 750m/m_Wire Brake Coil Harness | 1 |
48 | 1100m/m_Generator Wire Harness | 1 |
49 | 80mm Connecting Wire (White) | 1 |
51L | Arm, Crank, Left | 1 |
51R | Arm, Crank, Set | 1 |
52 | Bearing | 2 |
53 | Bearing | 2 |
54 | Belt, Drive | 1 |
55 | Generator/Brake | 1 |
56 | Magnet | 1 |
61 | Seat-(ND-E05) | 1 |
63 | Seat Back-(ND-E02) | 1 |
64 | Handgrip Foam (1" x 5T x 600mm) | 2 |
65 | Screw | 4 |
66 | 1/4" × 3/4"_Hex Head Bolt | 8 |
68 | Bolt | 8 |
71 | BOLT, HEX HEAD 3/8 X 2 (3/8 -16 X 2) CT800 | 4 |
72 | 1/4" × 13 × 1T_Flat Washer | 16 |
73 | Washer | 4 |
75 | Washer, Flat | 1 |
76 | Washer, Flat | 7 |
77 | Washer | 14 |
78 | 3/16" × 15mm × 1.5T_Flat Washer | 3 |
79 | O8 × O18 × 3T_Knurled Lock Washer | 4 |
80 | 1/4"_Split Washer | 7 |
82 | Washer, Split | 8 |
83 | WASHER, CURVE | 2 |
84 | Washer, Flat | 4 |
85 | C Ring (Blackfast) | 1 |
86 | Retainer | 2 |
87 | J Bolt | 1 |
88 | M8 x 7.0T Nyloc Nut | 5 |
89 | Nut, Locking | 6 |
90 | Nut, Locking | 4 |
91 | 5/16" × 6T_Nyloc Nut | 2 |
92 | M4 x 5T Nyloc Nut | 2 |
93 | M6 × 38m/m_ Socket Head Cap Bolt (Alloy Steel) | 1 |
94 | Bolt | 6 |
95 | M5 × 12m/m_Flat Head Socket Screw XBR55(551110) | 10 |
97 | Screw | 4 |
98 | Phillips Head Screw | 11 |
99 | Screw | 12 |
100 | M4 x 12m/m Phillips Head Screw | 2 |
101 | Screw | 8 |
102 | SCREW, TAPPING | 4 |
103 | Screw | 14 |
104 | NLA Spring, Pin, Locking | 1 |
105 | Screw | 4 |
106 | 5/16" x 1-3/4"_Button Head Socket Bolt | 2 |
107 | SCREW, SELF TAPPING 3.5 X 20 | 3 |
108 | Nut, Crank | 2 |
109 | Nut | 4 |
110 | Screw, flat head, socket | 2 |
111 | M5 × 10.O14 × 2T_Thumb Head Socket Screw | 8 |
112 | 12.14m/m _Wrench | 1 |
114 | Phillips Head Screw Driver | 1 |
116 | Pedal, Set | 1 |
117 | Pedal, Right | 1 |
124 | Sleeve, Rod End | 1 |
125 | Seat Carriage Cover | 1 |
126 | Bolt | 1 |
127 | O8 × 16 × 1.0T_Flat Washer | 3 |
128 | COVER, SEAT BACK CR800 (V.2) | 1 |
129 | M6_Nyloc Nut | 1 |
132 | 14.15m/m _Wrench | 1 |
136 | Screw | 4 |
140 | Rack, Sensor | 1 |
141 | Handle Bar Cover | 1 |
143 | Seat Track Fixing Plate-(390×20×3T) | 1 |
148 | Block | 1 |
160 | Washer, Flat | 6 |
161 | M6 × 10L_Flat Phillips Head Screw | 4 |
162 | WASHER, FLAT 1/4 X 16 X 1.0T CR800 | 4 |
163 | Sleeve | 4 |
164 | M6 X 19L_Nut | 4 |
165 | M6 x 10L_ Button Head Socket Bolt | 4 |
166 | Wheel | 4 |
167 | Adjusting Lever (Same as C120102-Z1) | 1 |
168 | Lever Anchor | 1 |
169 | M5 × 25m/m_Flat Head Socket Screw | 2 |
170 | WASHER, NYLON 15 X 6 X 4T R92/CR800 | 1 |
171 | M5 × 45m/m_Socket Head Cap Bolt | 1 |
172 | O3/16" × 10m/m × 1T_Flat Washer | 1 |
173 | M5 × 5T_Nyloc Nut | 1 |
174 | SCREW, SELF TAPPING 3 X 12MM CR800 | 2 |
175 | Bolt | 2 |
176 | Bolt | 6 |
177 | Rubber Foot Pad-AC004-3/8" | 1 |
178 | Square End Cap-(75×25×2.0T) | 1 |
179 | Screw | 4 |
180 | SCREW, PHILLIPS HEAD M5 X 30MM F83/US77/VS77/WS77/F85/S77/S73/F80/CT800 | 4 |
185 | 3/8" × 4T_Nut | 1 |
193 | Cap, Round | 1 |
194 | TV Adaptor (5C2V) | 1 |
195 | Module, AC | 1 |
198 | 80mm Connecting Wire (Black) | 1 |
| Carton (Upper) | 1 |
| Carton (Lower) | 1 |
| NLA Decal, Seat Carriage | 1 |
| Console Faceplate (Upper and Lower Overlay) | 1 |
| L, R Sticker | 1 |
| Sticker, "Generator Console" XBR95(951110) | 1 |
| CR800 Model Sticker | 2 |
| Decal, "Spirit Fitness" Logo | 2 |
| Wire Stock Label | 2 |
| ASSEMBLY SCREWS | 1 |
| Guest Assembly Screws | 1 |